Interior and Exterior Paints

COVERCOAT 101

Appearance: Matt

Application: Suitable for application on raw plaster, ceilings and previously painted surfaces. Covercoat will partially fill the plaster grain.

Spreading rate: 4-6 m²/lt/coat, depending on porosity.

Drying time: 4 hours, depending on weather conditions.

Packaging: 1l, 5l, 20l

Colours: White

Uses: Ceilings and raw plaster as a first coater.

Features: Best results achieved by using a medium or long pile lambswool roller.  Allow 1-4 hours to dry before over coating.

Brilliant white, super quality and cost effective filler coat with high hiding power and good flow.

ACRYLIC PVA 202

Appearance: Matt

Application: Suitable for application on raw plaster, ceilings and previously painted surfaces.

Spreading rate: 7 – 8 m²/lt/coat

Drying time: 4 hours, depending on the temperature.

Packaging: 1l, 5l, 20l

Colours: White

Uses: Ceiling and raw plaster as a first coater.  Can also be applied over previously painted services in a sound condition. 

Features: Best results achieved by using a medium pile synthetic roller.  Allow 4hours to dry before over coating.

Brilliant white cost effective & economical PVA.  For interior/exterior use

POLAR WHITE 206

Appearance: Matt

Application: Generally applied using a medium or long pile roller.  Can also be applied over sound, suitable prepared and previously painted surfaces.

Spreading rate: 4-6 sq.m/lt/coat on rough porous surfaces.  7-8 sq.m/lt/coat on sealed surfaces

Drying time: 4 Hours, depending on temperature and porosity of substrate

Packaging: 20l only

Colours: Polar White

Uses: Suitable as a filler coat on dry, wood floated plaster and as final coat on ceilings or on walls where wash ability is of no consequence. 

Features: Polar white is an economical/ G.P acrylic with reasonable obliteration and spreading rate.

Brilliant white cost effective & economical PVA for interior/exterior use

SUPER ACRYLIC 303

Appearance: Matt

Application: Best results achieved using a medium pile synthetic roller.

Spreading rate: 7.5 – 8.5 sq.m/lt/coat

Drying time: 4 hours, depending on the temperature

Packaging: 1l, 5l, 20l

Colours: White, Pastel base. Deep Base and Transparent Base colours

 

Uses: A good quality super acrylic for interior/exterior use as a final coat.

Features: Apply on suitably prepared new walls, ceilings, fiber cement and previously painted surfaces

High quality, super white acrylic for interior/exterior use.  Good UV resistance and wash ability.

SUPERIOR ACRYLIC 401

Appearance: Matt

Application: Apply on suitably prepared new walls, ceilings and previously painted surfaces.

Spreading rate: 8-9 sq. m/lt/coat

Drying time: 4 hours, depending on the temperature.

Packaging: 1l, 5l, 20l

Colours: White, Pastel Base, Deep Base, Transparent Base and colours

Uses: A premium quality super white acrylic for interior/exterior use as a final coat.  Combines excellent UV resistance, wash ability and flexability with a satin smooth low sheen finish. 

Features: Best results are achieved using a medium pile synthetic roller.

Superior quality, super white acrylic for interior/exterior use.  Excellent UV resistance and wash ability.

MID-SHEEN 404

Appearance: MID-SHEEN

Application: Suitable for application by brush, roller and selected spray equipment.

Spreading rate: 8-10 sq.m/lt/coat

Drying time: 4 hours, depending on the temperature.

Packaging: 1l, 5l, 20l

Colours: White, Pastel Base colours

Uses: Mid-Sheen acrylic can be applied on all suitably prepared and primed internal/external surfaces.  Most suited for surfaces where improved wash ability and reduced dirt retention are required. 

Features: Mid-Sheen acrylic is a superior quality, washable acrylic co-polymer based coating with a medium sheen.

Premium quality decorative acrylic for interior/exterior use.  Extremely durable luxurious MID-SHEEN.  Excellent UV and stain resistance.  Washable and flexible.

VELVET SHEEN 407

Appearance: Velvet Sheen

Application: Best results are achieved using a short or medium pile synthetic roller.

Spreading rate: 9-10 sq.m/lt/coat

Drying time: 4 hours, depending on the temperature.

Packaging: 1l, 5l, 20l

Colours: White, Pastel base, Deep base, Transparent base and colours

Uses: Apply on suitably prepared new, smooth plaster and previously painted smooth surfaces.  Walls can be skimmed using Plasterskim to provide a smooth finish. 

Features:  Premium quality decorative acrylic for interior and exterior use as a final coat.  Velvet Sheen provides medium-high sheen to give a luxurious and durable finish.  Product shows excellent UV and weather resistance, a high degree of stain resistance, wash ability and flexibility.

A premium quality decorative acrylic for interior/exterior use.  Extremely durable luxurious SHEEN.  Excellent UV and stain resistance.  Washable and flexible.

FLEXI COAT TEXTURED COATING (FTC)

Appearance: Lightly Textured

Application: Best results will be achieved on a 2 coat system using a sheep skin or long haired synthetic roller

Spreading rate: 3-5 sq.m/lt/coat

Drying time: 6 hours, depending on the temperature.

Packaging: 1l, 5l, 20l

Colours: White and Pastel / medium colours

Uses: Flexi coat will bridge and cover, hairline plaster cracks to prevent the ingression of water, thus providing a weather proof coating. 

Features: Flexi coat is a Mica silica re-enforced coating developed primarily for exterior use.  Flexi coat provides flexible UV resistant and weather proof coating to resist the most severe weather conditions.

Premium quality tough and durable all weather resistant, finely textured acrylic.  Mica re-enforced.  Acid rain resistance and bridge hairline cracks.  Low Sheen finish for interior/exterior application.

SOFTEX RIPPLE TEXTURED COATING (SRT)

Appearance: Hi-build low sheen textured finish

Application: Best results can be achieved using a heavy duty sponge roller to achieve a hi-build ripple finish.  Two coats are normally recommended.

Spreading rate: 1.5 – 2.5 sq.m/lt/coat. (depending on ripple required)

Drying time: 16-20 hours, depending on temperature

Packaging: 1l, 5l, 20l

Colours: White

Uses: Softex Ripple can be applied to all suitably prepared and primed  surfaces to cover, hide and disguise minor surface imperfections. 

Features: Softex Ripple is a hi-build low sheen, smooth ripple textured coating for interior/exterior use.

Provides a Rippled Textured Finish with a soft Sheen.  Will hide and disguise surface imperfections in the plaster.  Must be applied using a heavy duty sponge roller.  Suitable for interior/exterior.

SUPER GLOSS ENAMEL (SGE)

Appearance: High Gloss Finish

Application: For best results use  a mohair or short pile synthetic roller or a good quality brush.  Spraying generally not recommended.

Spreading rate: 10 sq.m/lt/coat (can vary, depending on the colour)

Drying time: 16-20 hours, depending on the temperature.

Packaging: 1l, 5l, 20l

Colours: White, Pastel base, Deep base, Transparent Base and colours

Uses: Super Gloss Enamel is used as a finishing coat on internal/external surfaces that have suitably prepared, primed and undercoated.  Use on metal, wood and masonry surfaces that are dry in depth. 

Features: Super Gloss Enamel is an superior quality alkyd enamel with a high gloss finish which has excellent exterior durability and gloss retention.

Premium quality Super Gloss Enamel for interior and exterior surfaces.  Dries to a durable glossy finish with excellent weather resistance.

GLOSS ENAMEL (GLE)

Appearance: Glossy finish

Application: For best results use a mohair or short pile synthetic roller or a good quality brush.  Spraying not recommended

Spreading rate: 6-8 sq.m/lt/coat

Drying time: 16-36 hours, depending on temperature

Packaging: 1l, 5l, 20l

Colours: White and Black

Uses: Can be used as a finishing coat on all suitably prepared, primed and undercoated metal, wood and masonry surfaces. 

Features: Gloss Enamel is a good quality, cost effective alkyd enamel suitable for interior and exterior use.

Extremely cost effective Gloss Enamel of good quality for interior/exterior use.

SUPER EGGSHELL ENAMEL (ESE)

Appearance: Luxurious Eggshell finish

Application: Normally brush and/or mohair rollers, fine sponge rollers can be used

Spreading rate: 9-10 sq.m/lt/coat (depending on temperature and humidity)

Drying time: 16-24 hours, depending on temperature and humidity.

Packaging: 1l, 5l, 20l

Colours: White, Black, Pastel Base, Deep Base, Transparent Base colours

Uses: For use on all suitably primed, undercoated wood, metal and masonary surfaces.  Also suitable for kitchens and bathrooms. 

Features: A premium quality Egg Shell Enamel that provides a luxurious Eggshell finish to all interior surfaces

Premium quality Eggshell Enamel for interior surfaces.  Luxurious Eggshell finish to primed wood work, plaster or metal surfaces.

STOEP AND FLOOR PAINT (STP)

Appearance: Semi Gloss Finish

Application: Apply by brush or mohair roller to suitably prepared, dry and clean concrete floor.

Spreading rate: 7 – 9 sq.m/lt/coat

Drying time: 4 Hours, depending on temperature and humidity.

Packaging: 1l, 5l, 20l

Colours: Mid-Grey, Green and Red

Uses: Suitable for application to all concrete floors, screeds and cement tile window sills. 

Features: Stoep and Floor Enamel is an economical coating for light to medium floor traffic, with a durable semi-gloss finish.

Economical coating for light to medium floor traffic.  Not recommended for exterior conditions where rising moisture or damp can be trapped.